TauP PathΒΆ
TauP Path uses a model like TauP Time but
generates the
angular distances from the epicenter along the path at which the specified rays
travel. The output can be JSON, an SVG image or
in GMT Wessel and Smith [WS95] psxy format, and is
placed into the file taup_path with appropriate extension.
If you specify the --gmt flag then this
is a complete script with the appropriate psxy command prepended, so if you
have GMT installed, you can just:
taup path --mod iasp91 -h 550 --deg 74 -p S,ScS,sS,sScS --gmt
sh taup_path.gmt
and you have a plot of the ray paths in taup_path.pdf. To avoid possible plotting errors for
phases like Sdiff, the ray paths are interpolated to less than
1 degree increments. Or similarly an SVG image can be created directly with
taup path --mod iasp91 -h 550 --deg 74 -p S,ScS,sS,sScS --svg
and the result would be:
The usage is:
Usage: taup path [--debug] [--geodetic] [--geodetic] [--help] [--label]
[--legend] [--onlynameddiscon] [--verbose] [--withlatlon]
[--withtime] [--az=<azimuth>] [--az=<azimuth>]
[--baz=<backAzimuth>] [--baz=<backAzimuth>]
[--color=<coloring>] [--equitorialradius=m]
[--equitorialradius=m] [--invflattening=f] [--invflattening=f]
[--mapwidth=<mapwidth>] [--mapwidthunit=<mapWidthUnit>]
[--maxpathinc=<maxPathInc>] [-o=<outFile>] [--planet=<planet>]
[--planet=<planet>] [--prop=<toolPropsFilename>]
[--qml=<quakemlFilename>] [--staxml=<stationxmlFilename>]
[--xaxis=type] [--yaxis=type] [--eid=evt[,evt...]]...
[--sid=sta[,sta...]]... [--degminmax=min max]...
[--depthminmax=min max]... [--evt=lat lon]... [--evt=lat
lon]... [--sta=lat lon]... [--sta=lat lon]...
[--geodist=<geoDistTypes>...]...
[--geodist=<geoDistTypes>...]... [[--mod=<modelName>] [-h=depth
[,depth...]]... [--stadepth=depth[,depth...]]... [--scat=depth
deg]...] [[-p=phase[,phase...]]...
[--phasefile=<phaseFiles>]...] [[--allindex] [--deg=d[,
d...]]... [--exactdegree=d[,d...]]... [--exactkilometer=km[,
km...]]... [--incident=deg[,deg...]]... [--km=km[,km...]]...
[--rayparamdeg=s/deg[,s/deg...]]... [--rayparamidx=i[,
i...]]... [--rayparamkm=s/km[,s/km...]]... [--rayparamrad=s/rad
[,s/rad...]]... [--seconds=s[,s...]]... [--takeoff=deg[,
deg...]]... [--degreerange=[step][min max][min max step]]...
[--exactdegreerange=[step][min max][min max step]]...
[--exactkilometerrange=[step][min max][min max step]]...
[--incidentrange=[step][min max][min max step]]...
[--kilometerrange=[step][min max][min max step]]...
[--takeoffrange=[step][min max][min max step]]...]... [--gmt |
--html | --json | --svg | --text]
Plot ray paths, distance vs. depth, through the earth.
Options:
--color=<coloring> style of coloring for paths and wavefronts, one
of: auto, wavetype, phase, none
--debug enable debugging output
--degminmax=min max min and max distance in degrees for plotting
--depthminmax=min max min and max depth, km, for plotting
--eid=evt[,evt...] event id, like us7000pn9s, for lookup via USGS
fdsn event web service. Creates a distance if
station is also given.
--help display this help message
--label label with phase name
--legend create a legend
--mapwidth=<mapwidth> plot width in units from --mapwidthunit.
--mapwidthunit=<mapWidthUnit>
plot width unit, i for inch, c for cm or p for px.
--maxpathinc=<maxPathInc>
Maximum distance increment in degrees between path
points, avoid visible segmentation in plots
-o, --output=<outFile> output to file, default is stdout.
--onlynameddiscon only draw circles on the plot for named
discontinuities like moho, cmb, iocb
--prop=<toolPropsFilename>
load defaults from properties file
--qml, --quakeml=<quakemlFilename>
QuakeML file to load for earthquake origins to use
--sid=sta[,sta...] station id, like CO.HAW or FDSN:CO_HAW, for lookup
via fedcat web service. Creates a distance if
event is also given.
--staxml=<stationxmlFilename>
StationXML file to extract station latitudes and
longitudes from
--verbose enable verbose output
--withlatlon include lat,lon for path points in output.
--withtime include time for each path point, no effect for
SVG.
--xaxis=type x axis type, the depth/radius axis, one of degree,
radian, kilometer
No effect for SVG output.
--yaxis=type y axis type, the depth/radius axis, one of depth,
radius
No effect for SVG output.
Model Args
-h, --evdepth, --sourcedepth=depth[,depth...]
source depth in km
--mod, --model=<modelName>
use velocity model "modelName" for calculations.
Default is iasp91. Other builtin models include
prem, ak135, ak135fcont, and ak135favg.
--scat, --scatter=depth deg
scattering depth and distance in degrees, which
may be negative. Only effects phases with 'o' or
'O' in the phase name.
--stadepth, --receiverdepth=depth[,depth...]
the receiver depth in km for stations not at the
surface
Phase Names
-p, --ph, --phase=phase[,phase...]
seismic phase names
--phasefile=<phaseFiles>
read list of phase names from file
Distance is given by:
--allindex all arrivals at sampling of model
--deg, --degree=d[,d...]
distance in degrees
--degreerange=[step][min max][min max step]
regular distance range in degrees, one of step;
min max or min max step. Default min is 0, max
is 180 and step is 10.
--exactdegree=d[,d...] exact distance traveled in degrees, not 360-d
--exactdegreerange=[step][min max][min max step]
regular distance range in exact degrees, not
360-deg, one of step; min max or min max step.
Default min is 0, max is 180 and step is 10.
--exactkilometer=km[,km...]
exact distance traveled in kilometers, not 360-k
--exactkilometerrange=[step][min max][min max step]
regular distance range in kilometers, not 360-k,
one of step; min max or min max step. Default
min is 0, max is 1000 and step is 100.
--incident=deg[,deg...]
incident angle in degrees at the receiver, zero is
down, 90 horizontal, 180 is up.
--incidentrange=[step][min max][min max step]
regular range in incident angle in degrees, one of
step; min max or min max step. Default min is 0
and step is 10.
--kilometerrange=[step][min max][min max step]
regular distance range in kilometers, one of step;
min max or min max step. Default min is 0, max
is 1000 and step is 100.
--km, --kilometer=km[,km...]
distance in kilometers along surface.
--rayparamdeg=s/deg[,s/deg...]
ray parameter from the source in s/deg, up or down
is determined by the phase
--rayparamidx=i[,i...] ray parameter from the source as index into model
sampling, up or down is determined by the phase
--rayparamkm=s/km[,s/km...]
ray parameter from the source in s/km, up or down
is determined by the phase
--rayparamrad=s/rad[,s/rad...]
ray parameter from the source in s/rad, up or down
is determined by the phase
--seconds=s[,s...] arrival time in seconds
--takeoff=deg[,deg...] takeoff angle in degrees from the source, zero is
down, 90 horizontal, 180 is up.
--takeoffrange=[step][min max][min max step]
regular range in takeoff angle in degrees, one of
step; min,max or min,max,step. Default min is 0
and step is 10.
Lat,Lon influenced by:
--az=<azimuth> azimuth in degrees, source to receiver
--baz=<backAzimuth> backazimuth in degrees, receiver to source
--equitorialradius=m Equitorial radius in meters for distance
calculations when geodetic or geocentric,
defaults to WGS84 ~ 6378137 meters.
--evt, --event=lat lon event latitude and longitude. Creates a distance
if station is also given.
--geodetic use geodetic latitude for distance calculations,
which implies an ellipticity. Default is
spherical. Note this only affects calculation of
distance from lat/lon pairs, all travel time
calculations are done in a purely spherical
model.
--geodist=<geoDistTypes>...
Type of distance calculation to use for lat,lon
distance calculation, one of spherical,
geocentric, geodetic. Default is spherical. Note
this only affects calculation of distance from
lat/lon pairs, all travel time calculations are
done in a purely spherical model.
--invflattening, --geodeticflattening=f
Inverse Elliptical flattening for distance
calculations when geocentric or geodetic,
defaults to WGS84 ~ 298.257. The distance
calculation uses 1/x.
--planet=<planet> Geodesic for planets, for distance calculations
when --geodetic, one of: EARTH, MOON, MARS,
VENUS, MERCURY, CERES, JUPITER, SATURN, URANUS,
NEPTUNE.
--sta, --station=lat lon
station latitude and longitude. Creates a distance
if event is also given.
Output Type:
--gmt outputs as GMT
--html outputs as SVG in HTML
--json outputs as JSON
--svg outputs as SVG
--text outputs as Text